Slab jacking or Mud jacking is a technique of uprising the
unlevelled surface of concrete by efficient ways. Slab jacking is typically
less in expensive. You might feel the process of slab jacking is easy but it
will be efficient if it is performed by professionals.
The machinery used in this process are grout mixer, rock driller
and grout pump. This process is also called “ Pressure Grouting”. Grout mixed
is a 8 cu-Ft capacity in which mixes the grout and used to spent the grout or
even lift it. Grout pump is a hydraulic piston pump operated with cavity pumps.
The work load of each hydraulic pump is up to 100 cu-Ft/hour and 180 cu-Ft/hour
if it is has two cylinder models. Rock drill is to make whole below the
concrete to fill the vacuum. There might be more than one drills to confirm
that driller didn’t miss the vacuum area. Other popular materials for slab
jacking are Portland cement, fly ash, sand or pulverized limestone .
Slabjacking is the efficient way to
treat your sunken surfaces. If your concrete is sinking due to poorly fitted
slabs. Some of the reasons could also be soil erosion or soil sinking. You no
need to replace the concrete as I said previously that its economical, the machinery
can float back to it’s original position by pumping the mixture of materials in
very efficient manner. This method provides the slab a strong base.
The
concrete will become as strong as it should be. Some people fill dirt in order
to cover the sunken are but it never is effective and helps you with your
problem, using granular mixtures is always best .It can be performed in any
season anytime. The upraised concrete looks just the same like the others. The
application of slab jacking is all over homes, parking slots, garage, basement
levels, walkways, apartments, roadways. If you have some unlevelled surface
contact your nearest slab jacking surface and make your path levelled.
No comments:
Post a Comment